Robe ROBIN LEDBeam 350, Руководство пользователя

Страница: 24 / 39

24
ROBE_DMX_INPUT * *
ROBE_WIRELESS_UNLINK *
RDM model ID for the Robin LEDBeam 350 is 0x0113.
7. Error and information messages
Tilt Err
This message will appear after reset of the fixture if the head´s indexing circuit malfunctions (sensor failed) or the
stepping motor or its driving PCB is defective. The head is not located in the default tilt position after fixture reset.
Pan Err
This message will appear after reset of the fixture if the head´s indexing circuit malfunctions (sensor failed)
or the stepping motor or its driving PCB is defective. The head is not located in the default pan position after
fixture reset.
Zoom Err
This message will appear after reset of the fixture if the zoom module is not located in the default position.
Cause of the message can be some defective zoom stepping motor.
Red Shrt
The message informs you that short circuit has occured in the red LEDs circuit on the LEDs PCB.
Green Shrt
The message informs you that short circuit has occured in the green LEDs circuit on the LEDs PCB.
Blue Shrt
The message informs you that short circuit has occured in the blue LEDs circuit on the LEDs PCB.
Amber Shrt
The message informs you that short circuit has occured in the amber LEDs circuit on the LEDs PCB.
Red Unp
The message informs you that red LEDs circuit has been interrupted on the LEDs PCB.
Green Unp
The message informs you that green LEDs circuit has been interrupted on the LEDs PCB.
Blue Unp
The message informs you that blue LEDs circuit has been interrupted on the LEDs PCB.
Amber Unp
The message informs you that amber LEDs circuit has been interrupted on the LEDs PCB.
Clea Air F
The message informs you that the item "R Ti" is at 0 value (in the menu "Air fil"). Clean air filter in the fixture
base reset this counter.