manualshive.com logo in svg

Robe ROBIN iPointe65, Руководство пользователя

Поделиться
Скачать
Robe ROBIN iPointe65 Скачать руководство пользователя страница 50

50

at a small toothlike projection (8) on the edge of the rotating gobo wheel.

 

Important!

 When inserting the gobo holder back to the rotating gobo wheel, one of the adjacent gobo holder 

has to be oriented according to the same rule, it means that its position point (7) has to aimed at

 the toothlike 

projection (8) on the edge of the rotating gobo wheel. 

10. Screw the lamp cover (2) back to the fixture.

11. 

Carefully check the gasket for signs of deformities or hardening and if it is correctly placed in the groove of

    the head housing before screwing the head cover back on the head.

12. Screw the head cover on the head.

13. Connect the fixture to the mains.

14. Use the menu Service to calibrate replaced gobos (Service -> Calibration ->  Calibrate effects -> R. Gobo

    Index 1....9 ).

Warning!

Use only gobos intended for the Robin iPointe65. 

Do not try to use gobos from the Robin Pointe. 

(The Robin iPointe65 generates heat the gobos of the Robin Pointe are not designed for).

Orientation of gobos in the gobo holders

Содержание ROBIN iPointe65



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды