manualshive.com logo in svg

Robe ROBIN iPointe65, Руководство пользователя

Поделиться
Скачать
Robe ROBIN iPointe65 Скачать руководство пользователя страница 31

31

Another way, how to update software in the fixtures (especially large installation of fixtures)  is to use the ROBE 

Uploader. It is a software for automatized software update of Robe fixtures. It takes advantage of RDM

 support).

For more information please see https://www.robe.cz/robe-uploader/.

6.7 Icon "Lamp menu"

Lamp Status

 

- The item enables to switch the lamp on/off.

 

Settings

 

- The menu offers many items for setting of lamp behaviour.

    

Lamp Power

 - The item allows to set desired power of the lamp

             Standard mode

 

- Lamp runs on max. power of 310W. This mode is set as default.

 

Eco mode

 - Lamp power is reduced to 265W.

    This setting can be temporarily changed by DMX command at "Power/Special functions" channel.

 

   Lamp Ignition Delay

 - The item allows to set the time delay( 0-90sec.) before igniting the lamp by DMX 

   command. If the lamp is started directly from the control panel, the time delay will be ignored.

   

Lamp Light Sensor

 - Select this item to switch the light sensor off. The option "On” is intended for a standard 

operation.

 

The option "Off” is for “emergency operation” only! If the lamp light sensor is switched off, the fixture 

will still try to ignite the lamp (even when the lamp is damaged or missing), on this account some electronics 

parts of the fixture can be damaged!

   

Lamp On/Off Settings

 - Use the menu to set rules for automatic switching on/off the lamp.

   

 Lamp On Power On

 - If the item is on, the lamp will be automatically turned on  after switching the 

 

fixture on.

    

Lamp Off via DMX

 

- The item enables to switch the lamp off via DMX command from DMX 

 

controller. 

 

   

 

Lamp On if DMX Present

 - The item allows you to  strike the lamp automatically after 26 seconds 

 

if DMX  signal is present on the fixture´s DMX input.   

 

Lamp Off if not DMX

 - The item allows you to switch off the lamp automatically after 2 minutes 

 

if DMX signal is missing on the fixture´s DMX input.

7. RDM

This fixture supports RDM operation. RDM (Remote Device Management) is a bi-directional communications 

protocol for use in DMX512 control systems, it is the new open standard for DMX512 device configuration and 

status monitoring.

The RDM protocol allows data packets to be inserted into a DMX512 data stream without adversely affecting 

existing non-RDM equipment. By using a special „Start Code,“ and by complying with the timing specifications 

for DMX512, the RDM protocol allows a console or dedicated RDM controller to send commands to and receive 

messages from specific moving lights.

RDM allows explicit commands to be sent to a device and responses to be received from it. 

The list of commands for Robin iPointe65 is the following.

Parameter ID

Discovery command SET command

GET command

DISC_UNIQUE_BRANCH

*

DISC_MUTE

*

DISC_UN_MUTE

*

DEVICE_INFO

*

SUPPORTED_PARAMETERS

*

SOFTWARE_VERSION_LABEL

*

DMX_START_ADDRESS

*

*

IDENTIFY_DEVICE

*

*

DEVICE_MODEL_DESCRIPTION

*

Содержание ROBIN iPointe65



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды