Robe ROBIN iParfect 150 FW RGBA, Руководство пользователя

Страница: 9 / 32

9
3.4 Rigging the fixture
A structure intended for installation of the fixture(s) must safely hold weight of the fixture(s) placed on it. The
structure has to be certificated to the purpose.
The fixture must be installed in accordance with national and local electrical and construction codes and re -
gulation.
For overhead installation, the fixture must be always secured with a safety wire.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working
load limits, installation material being used, and periodic safety inspection of all installation material and the
projector. If you lack these qualifications, do not attempt the installation yourself, but use a help of professional
companies.
CAUTION: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety
of a possible installation, do not install the fixture!
The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled
person once a year.
Allow the fixture to cool for ten minutes before handling with it.
The fixture has to be installed out of the reach of public.
The fixture must never be fixed swinging freely in the room.
When installing the device, make sure there is no highly inflammable
material (decoration articles, etc.) in a distance of min. 0.4 m.
Use an appropriate clamp to rig the fixture on the truss.
Make sure that the device is fixed properly! Ensure the
structure (truss) to which you are attaching the fixtures is secure.
When installing fixtures side-by-side, avoid illuminating one fixture with another!
The fixture can stand on the stage floor ( by means of the unfolded mounting bracket) or rigged on a truss (via
folded mounting bracket) without altering its operation characte ristics.
.