Robe ROBIN iBeam 250, Руководство пользователя

Страница: 4 / 43

4
2. Operating determinations
WARNING! This unit does not contain an ON/OFF switch. Always disconnect the power input cable
from mains to completely remove power from unit when not in use or before cleaning or servicing the unit.
Avoid brute force when installing or operating the device.
Never lift the fixture by holding it at the projector head, as the mechanics may be damaged. Always hold the
fixture at the transport handles.
When choosing the installation spot, plea se make sure that the device is not exposed to extreme heat or dust.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.
Always secure the fixture with an appropriate safety wire.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
The maximum ambient temperature 45°C must never be exceeded.
Do not block the front lens array with any object when the fixture is under operation.
The fixture becomes very hot during operation. Allow the fixture to cool approximately 20 minutes prior to ma -
nipulate with it.
To avoid damage of an internal optical system of the fixture, never let the sunlight (or
other light source) lights directly to the lens array, even when the fixture is not working
Potential foggy front lens array does not influence function of the fixture and does not
subject to complaint.
Potential colour non-uniformity of the front lens array may occur, it does not influence
colour output from the fixture and is not considered a fault.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the stand-
ard EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and
entertainment lighting control apparatus for professional use. Part 2: Immunity.
The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given
by this standard (e.g. transmitters in surrounding area) before installing the equipment.
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia
equipment – Emission Requirements according to class B.
Please use only an original ROBE packaging (paper box, loader case or foam shell) for
transporting the device, otherwise potential damage of the device during its transport
will not subject to warranty.