Robe Robin CycPix 12, Руководство пользователя

Страница: 19 / 29

CycPix 12
19
6. Control menu
The Robin CycPix 12 is equipped with 2-line LCD display which allows to set the fixture´s behaviour according to
your needs, obtain information on its operation, control various range of effects and lastly program it, if it has to be
used in a stand-alone mode.
Control board:
The four control buttons on the front have the following functions:
- ESCAPE button-leaves menu without saving changes.
- ENTER
button- enters menu, confirms adjusted values and leaves menu.
- UP
and -
DOWN
buttons - move between menu items on the same level, sets values.
After switching the fixture on, display shows current DMX address
.
6.1 Addressing (DMXA)
Set DMXA - Use this menu item to set the DMX start address of the fixture, which is defined as the first channel
from which the Robin will respond to the DMX controller.
Please, be sure that you do not have any overlapping channels in order to control each Robin CycPix 12 correctly
and independently from any other fixture on the DMX data link.
If there is no data received at the DMX input, the display will start to flash "0001” with actually stored DMX
address.
DMX Pres - DMX preset . Use the menu to select desired channel mode.
Mode 1 - 18 control channels
Mode 2 - 12 control channels
Mode 3 - 54 control channels
Mode 4 - 66 control channels
6.2 Fixture information (Info)
POn Time - Power on time . Select this menu to read the number of fixture operation hours.
Total - The item shows the total number of the operation hours since
the Robin CycPix 12 has been fabricated.
Reset - The item shows the number of the operation hours that the
Robin CycPix 12 has been powered on since the counter was last reset.
In order to reset this counter to 0, press and hold both [UP] and [DOWN] buttons and the
[Enter] button at the same time.
DMX In - DMX readout. The menu is used to read DMX values of each channel received by the fixture.
Temp
-
Temperature
. The menu shows temperature in the moving LED head.
Current
- A current temperature of the moving LED head.
Highest
- A maximum temperature of the moving LED head since the fixture has
been fabricated.