Robe Robin CycBar 15, Руководство пользователя

Страница: 13 / 30

Robin CycBar 15
13
In order to reset this counter to 0, you have to press and hold the UP and DOWN buttons and at the same
time press the ENTER button.
VErS. --- Software Versions. Select this function to read the software version of the fixture processors.
ICI.b. --- display processor
IC2.b. --- pixel driver
IC3.P. --- pixel control
ViFi --- Wireless DMX module
tEMP --- Fixture Temperatures. Select this menu to read the temperatures of the fixture:
Cur.t. --- the current temperature of the fixture inside.
Hi.tE. --- the menu item shows the max. temperatures of the fixture inside since
the fixture has been fabricated.
rSEt --- the menu item shows the maximum temperatures of the fixture inside since the counter
was last reset. In order to reset this counter to 0 you have to press and hold the UP and DOWN
buttons and at the same time press the ENTER button.
Note: The ambient temperature should not exceed 40°C.
The temperatures can be displayed in either °C or °F units - see option “tnP.u.“ in the menu “Pers“.
DM.In. --- DMX values . Select this function to read DMX values of each channel received by the fixture.
6.3 Personality
Use this menu to modify the CycBar 15 operating behaviour.
DM.Pr. --- DMX preset . Select this menu item to set a desired DMX mode. Please refer to the chapter "DMX
protocol" for detail description of each DMX mode.
dM.In. --- DMX input . Select this menu item to select desired DMX input:
UirE --- Wire DMX.
UirL --- Wireless DMX
UrLo --- Wireless DMX –> wire DMX. The fixture receives wireless DMX signal and sends it to its
DMX output connector. Next fixtures can be connected to this fixture by DMX cable (fixture works
as a Wireless-DMX convecter.
DiSP. --- Display adjusting . This function allows you to change the display settings.
d.On --- this function allows you to keep the display on or to turn off automatically 2 minutes
after last pressing any button on the control panel.
d.Int. --- select this function to adjust the display intensity (6-min.,100-max.).
turn ---
select this function to used to rotate menu 180 degrees from current orientation
.
C.CL.n.
--- Colour calibration mode. If the function is on, the white output from the fixture (and also mixed
colours) is more uniform.
C.MI.n.
--- Colour mixing mode - This item allows switching into RGBW or CMY mode. In the CMY mode, the
white(8bit)/white (16) bit channels are not active.
diM.c. --- Dimmer curve. Use the menu to set desired dimmer curve:
SqL --- Square law curve.
Lin --- Linear curve.