Robe Robin CycBar 15, Руководство пользователя

Страница: 16 / 30

Robin CycBar 15
16
“bL.15” a blue LED 15
“di.15” a dimmer 15
“S.tin” a step time
“COPY“. – this item duplicates the current prog. step to the next prog. step.
Note: Items in this menu depend on selected DMX mode.
5. Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
6. Use the UP/DOWN buttons to select next channel and press the ENTER button.
7. After having set all channels in the current program step, press the ESCAPE button to go by one menu level
back and select another program step.
6.7 Special functions
rdML --- Code .This menu item shows the first part of the RDM identification code.
rdMH --- Code . This menu item shows the second part of the RDM identification code.
ViFi --- Wireless DMX. The menu serves for reading of the wireless operation status (only for Wireless DMX
version).
50 --- Wireless DMX signal. The menu item shows level of received signal in %. If the fixture is not linked to
the transmitter, “ niSS ” is displayed.
UnLI --- Wireless DMX unlink. The item serves for unlinking the fixture from transmitter.
AdJ --- Effect Adjustment. The menu allows calibration of white colours.
dMH --- DMX Values. The menu item allows to set desired colour before calibrating of white colours.
C.CAL --- Colour calibration. Calibration of white colours.
uPd.M. --- Updating mode . The menu item allows you to update software in the fixture via either serial or USB port
of PC.
The following items are required in order to update software:
- PC running Windows or Linux or macOS
- DSU file - Flash cable RS232/DMX, P/N13050624 (if you want to use a serial port of PC).
- Robe Universal Interface or Robe Universal interface WTX (if you want to use an USB port of PC)
After the software updating the fixture will be set to default (factory) values.
To update software in the fixture:
1. DSU file is available from the Robe web site at WWW.robe.cz .
File with extension zip is intended for Windows (used and tested from XP to W10 on 32/64bit systems).
File with extension tbz is intended for Linux (used and tested on Debian and Ubuntu 32/64bit).
File with extension dmg is intended for macOS (used and tested on OSX up to Sierra) XQuartz required,
install it from https://www.xquartz.org/ .
Save the download file to a folder on your computer.
In case that you use windows, extract files in the zip file (e.g. DSU_RobinCycBar15_17010625.zip)
2. Disconnect the fixture from DMX controller.
3. If you use the flash cable RS232/DMX, connect a serial port of your computer with DMX input of the fixture
by means of the cable.
If you use the Robe Universal Interface, connect a USB port of your computer with the Robe Universal Interface
by means of the USB cable and DMX input of the fixture with the DMX output of the Robe Universal Interface
via a DMX cable.
4. Switch the fixture to the update mode (SPEC --> Upd.M.).