Robe Robin Actor 3 Smart White, Руководство пользователя

Страница: 18 / 26

8
6.9 Stand-alone (St Alone)
Music T - Music trigger . Select this function to enable the sound control of the running program via the built-in
microphone.
Auto Run - Presetting playback . This function allows you to select the program which will be played in the
stand-alone mode after switching the fixture on. Selected program will be played continuously in a loop.
Off
- The option disables „Auto Run” function.
Test
- The option will start built-in test program.
Prog 1
- The option will start user-created program 1
Prog 2
- The option will start user-created program 2
Prog 3
- The option will start user-created program 3
Pr Play - Playing program . Select this menu to run a user-created program in a loop.
Test Prg - The option runs built-in test program.
Prog 1 - The option runs user-created program 1
Prog 2 - The option runs user-created program 2
Prog 3 - The option runs user-created program 3
Select the program you wish and press [ENTER]. The selected program starts running. By Pressing [ENTER]
again, program pauses running.
Pr Edit - Editing program . Select this menu to edit or create the program. The Robin Actor 3 has one built-in
program and one user-editable program up to 40 steps. Each program step has a step time - during which
effects last in the current step and a fade time- during which effects move to new positions.
To edit program:
Procedure:
1. Press [NEXT] or [PREV] to select the menu "Edit" and press [ENTER].
2. Press [NEXT] or [PREV] to select the desired program step and press [ENTER] button.
3. Press [NEXT] or [PREV] to select the desired item and press [ENTER] button. Now you can edit by [NEXT]
or [PREV] buttons the DMX value (0-255) for selected item:
Prg End. a total number of the program steps (value 1-40). This value you should be set before
starting of programming (e.g. if you want to create program with the 10 steps,
set Prg End=10).
F.Tim a fade time (0-25.5 sec)
S.Tim a step time (0-25.5 sec)
COPY copying the current prog. step to
the next prog. step
4. Press [ENTER] button to confirm adjusted value .
5. Press [ESCAPE] button, select next prog. step, press [ENTER] button and repeat steps 3-5.
6.10 Reset
This option enables the Robin Actor 3 to index all effects and return to their standard positions.
6.11 Special functions (Special)
RDM Low
- This menu item shows the first part of the RDM identification code .
RDM High
- This menu item shows the second part of the RDM identification code.
Wireless
-
Wireless DMX status
. The menu serves for reading of the wireless operation status.
r.InF
. -
Wireless DMX information
. The menu item shows level of received signal in %.
If the fixture is not linked to the transmitter, “no.LI” is displayed.
r.UnL . - Wireless DMX unlink. The item serves for unlinking the fixture from transmitter.
Sw Upd - Software update . The menu item allows you to update software in the fixture via either serial or
USB port of PC.
The following are required in order to update software:
- PC running Windows 95/98/2000/XP/7 or Linux
- DMX Software Uploader
- Flash cable RS232/DMX No.13050624 (if you want to use a serial port of PC)
- Robe Universal Interface (if you want to use an USB port of PC)