Robe Robin Actor 3 Smart White, Руководство пользователя

Страница: 17 / 26

7
In order to reset this counter to 0, press and hold both [NEXT] and [PREV] buttons and the
[Enter] button at the same time.
DMX In - DMX readout.
The menu is used to read DMX values of each channel received by the fixture.
Temp
-
Temperature
. The menu shows temperature in the LED module.
Current
- A current temperature of the LED module.
Highest
- A maximum temperature of the the LED module since the fixture has
been fabricated.
High Res
- A maximum temperature of the the LED module since the counter
was last reset.
In order to reset this counter, press and hold both [NEXT] and [PREV] buttons and the
[Enter] button at the same time.
Sw Ver - Software versions . Select this item to read the software version of the fixture modules.
IC-1 - A zoom processor on the main board in the fixture arm.
IC-2 - A display processor on the display board in the fixture base.
IC-3 - LED control processor on the board in the fixture head.
6.6 Personality (Pers)
DMX Pres
-
DMX preset
. Use the menu to select desired channel mode.
Mode 1 - 19 control channels
Mode 2 - 11 control channels
Mode 3 - 7 control channels
Mode 4 - 5 control channels
Mode 5 - 19 control channels
Mode 6 - 24 control channels (equivalent to the LEDWash 300 SW in mode 1)
DMX In - DMX input . Use the menu to select mode of receiving DMX signal.
Wired - DMX signal is received by means of the standard DMX cable.
Wireless
- DMX signal is received by means of the inbuilt wireless module.
Display
-
Display adjusting
. This menu allows you to adjust the display behaviour.
Turn
- This function turns the display by 180°.
On/Off T
- This function allows you to keep the display permanent on or turn it off two
minutes after last pressing any button on the control panel.
Contrast - Use this function to adjust contrast of the display (0-100%).
Backlight - Use this function to adjust backlight of the display (0-100%).
Mic Sens - Microfon sensitivity . Enter the menu if you want to adjust the microphone sensitivity ( 1-max.,
19-min.).
Fans - Fan mode . Use the menu to set the fixture fans to max. fan power mode (" High ") or to auto- control
mode (" Auto ").
Temp Uni
-
Temperature unit
. Use the menu item to change temperature unit from °C to °F.
I Ef Pos
-
Init effect positions
. Use the menu to set all effects to the desired positions at which they will stay
after switching the fixture on without DMX signal connected.
Defaults
- The menu item allows to set all fixture parameters to the default (factory) values.
6.7 Manual Control (Manual)
Pres Eff - Preset effects . Use the menu to show preset positions of each channel effect.
Manual C - Manual control . Use the menu to control all fixture channels by means of the control panel.
6.8 Test program (Test Prg)
Use this menu item to run a special demo-test sequences without an external controller, which will show you
some possibilities of using Robin Actor 3.