Robe PATT 2017, Руководство пользователя

Страница: 5 / 8

5
3. Installation
The PATT 2017 must be installed by a qualified electrician in accordance with all
national and local electrical and construction codes and regulations.
3.1 Mounting the PATT 2017
The fixture can be rigged to the truss or fastened to the floor stand via a mounting yoke. The hole of diameter
of 13 mm in the yoke serves for fastening a clamp (or a spigot) to the yoke.
Note: the spigot has to be inserted into the floor stand and always secured.
For overhead installation the PATT 2017 has to be always secured to the truss by means of a safety wire (
that
can hold at least 10 times the weight of the fixture) which is fastened to the truss and around mounting yoke
of the PATT 2017.
3.2 Connecting the PATT 2017 with the PATT Driver
1. Disconnect the PATT Driver from mains.
2. Connect the PATT 2017 to the PATT Driver by means of the 4-pin data cable.
3. Connect the PATT Driver to mains and make desired setting.
ALWAYS DISCONNECT THE PATT DRIVER FROM MAINS BEFORE CONNECTING/DISCONNECTING
THE PATT 2017.
Please see the user manual of the PATT Driver for more detailed information about its operation