background image

3

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY 

BEFORE INSTALLING THE PRODUCT 

.

1. Safety instructions

CAUTION!

 

The PATT 2017 was designed for indoor use only.

The product is for professional use only, it is not for household use.

This product has left our premises in absolutely perfect condition. In order to maintain this condition and to 

ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning 

notes written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this 

manual or any unauthorized modification to the product.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on 

immediately. The arising condensation water might damage your device. Leave the device switched off until 

it has reached room temperature.

The pixel PATT should be operated with the PATT Driver only. 

The PATT 2017 becomes hot during its operation, allow it to cool prior

 to manipulation.

The PATT 2017 unit never must be covered with cloth or other materials during 

operation.

Refer servicing to qualified service personnel.

Warning! Risk Group 2 LED product according to EN 62471

LED light emission. Risk of eye injury. Do not look into the beam at short distance of 

the of the product. Do not view the light output with optical instruments or any 

device that may conncentrate the beam.

The light source contains blue LEDs. 

When choosing the installation spot, please make sure that the PATT 2017 are not exposed to extreme heat, 

moisture or dust.

Operate the PATT 2017 only after having familiarized with its functions. Do not permit operation by persons not 

qualified for operating the PATT 2017. Most damages are the result of unprofessional operation!

Please use the original packaging if the PATT 2017 is to be transported.

Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!

Содержание PATT 2017









Отзывы: