Robe Flare CB Series, Руководство пользователя

Страница: 18 / 19

18
5 .Set the program running options (Menu path: "St.A."--->"C.S.A.") on the master and slaves:
For time control of the fixtures select item " tiM " on the master and all slaves.
For audio control of the fixtures select item " Au.P. " on the master and all slaves.
For audio random selection of effects ,select item "
Au.r
" on the master and all slaves.
6
.Set the lamp automatically On after switching the fixtures on (Menu path: "LA.P."--->"LA.A."--->
On
) and check
that function
d.OF
is disabled (Menu path: "LA.P."--->"d.OF"--->
OFF
)
Note: Master-slave operation is only possible among fixtures: Fusion,ClubScan 150,ClubScan 250,ClubRoller
150,ClubRoller 250,Funky ,Hip-Hop,Flare.
10. Error and information messages
C.Er.
(Coour-wheel error)
This message will appear after the reset of the fixture if the magnetic-indexing circuit malfunctions (sensor failed
or magnet missing) or the stepping-motor is defective (or its driver circuit on the main PCB). The colour -wheel
is not located in the default position after the reset.
M.Er. (Master error)
The message informs you that the fixture was addressed as a master and DMX signal is connected to its
input.Disconnect the DMX controller from fixture's input and reset the fixture.
F.Er.
This message will appear if the frequency of the main is not standard 50 or 60 Hz.This message can appear as
a result of the interference during the lamp starting (if the lamp or igniter is old) or as a result of the interference
by neighbouring devices. In these cases the message does not affect the fixture operating!
11.Technical specifications
Power supply:
-Voltage......................100,120,208,230 ,240V AC, 50/60Hz ~
-Fuse..........................T 1,6 A@ 230V
-Fuse..........................T 3,15 A@ 120V
-Power consumption.....250 VA
Lamp:
- Philips ELC /10H 4V/50W
- Socket: GX5.3
Beam angle:
- 19°
Focus:
- Manual
Colour wheel:
- 15 dichroic filters plus white
Strobe:
- Strobe effect with variable speed (max.4 flashes per second)
Electronics:
- Intelligent control panel with 3-digit LED display
- Digital serial input DMX-512
- 2 control channels:
Channel 1: Colour wheel
Channel 3: Shutter,Dimmer
- Time and audio trigger