15
8.5 Demo-test sequences
Use the item to run a special demo-test sequences without an external controller,which will show you some
possibilities of using the fixture.
8.6 Stand-alone setting
Select this menu to set fixture behaviour in stand-alone mode.
run
---
Running program.
Select this menu to run a program in a loop or to generate random effects.
St.M.
---
Stand-alone mode.
This function allows you to set the fixture as master or as slave:
OFF.
--- The option disables Master/slave operation.
Mst
---
Master.
This function sets the fixture as a master.
SLA
---
Slave.
This function sets the fixture as a slave.
Aut.
---
Automatically playback.
This function allows you to play the program automatically after switching the
fixture on.The program will be played continuously in a loop.
C.S.A.
---
Control of the stand-alone operation
.
tIM.
---
Time trigger
. Select this item to run program by time control.
Au.P.
---
Audio trigger program
.Select this item to run program by audio control
Au.r.
---
Audio/auto trigger random effect
.Select this item to run random generated effects
by the audio control.If there are no audio impulses present,the fixture will generate random
effects.
Pr.E.
---
Editing program
.Select this menu to edit the program.The fixture has one editable program.Each
step has a step time-the time,during which effects last in the current step.
Programming procedure:
1. Press [UP] or [DOWN] to select the desired program step ("E.01" - "E.30") and press [ENTER].
2. Press [UP] or [DOWN] to select the desired item and press [ENTER]-button.Now you can edit by [UP] or
[DOWN] buttons the DMX value (0-255) for selected item:
Col.
- a colour wheel, value 0-255
diM.
- a dimmer , value 0-127
COP.
- copying the current prog. step to the next prog. step.
tIM.
- step time,value 0.0-25.5 seconds
End.
- this item stops the program.
Press [ENTER]-button to confirm adjusted value .
3.Select next prog. step and repeat this procedure (steps 1-3).
The number of steps in your program will be determined by the position in which you confirm the "
End"
for
the end of the program.If you want to extend the program, select "
COP
." in the last step to copy current step
to the next step.
8.7 Reset fixture
Select this item if you wish to make a fixture reset.
8.8 Special functions
Use this menu for special services like updating software or effect calibration.
VEr.
---
Software version
.Select this function to read the software version of the fixture processor.
UPd.
---
Software update
-Using this function you can update software in the fixture via PC and serial link.
The following are required in order to update software:
Содержание Flare CB Series
Страница 1: ...Version 1 0 ...
