DigitalSpot 7000 DT
98
31.8 Replacing the filter cartridge in the projector.
1.
Turn off the DigitalSpot 7000 DT and unplug the AC power cord from the AC outlet.
2.
Remove the projector from the fixture chassis as described in the chapter
Replacing the projector.
3.
Press on the filter cover to release the latch and open
the filter cover.
4.
Pull out the filter cartridge. When taking out the filter
cartridge, put your finger on the filter cartridge’s tab and then
pull.
5.
Put the new one back into the position and close the filter cover.
Make sure that the filter cartridge is properly and fully inserted.
Make sure the filter cartridge is inserted in the projector. If the
filter cartridge is not inserted, the projector cannot be turned on.
Do not put anything into the air vents. Doing so may result in
malfunction of the projector.
6.
Turn the projector on and reset the filter counter and the scroll
counter as described below.
7.
Place the projector back to the fixture chassis.
31.8.1 Resseting the Filter Counter
1.
Press the MENU button on the projector to display the On-Screen Menu. Use
the Point
buttons to move the red frame pointer to the Setting Menu icon.
Содержание Digital Spot 7000 DT
Страница 1: ...Version 1 7 ...
Страница 4: ...DigitalSpot 7000 DT 4 31 10 System restore 100 31 11 Cleaning 101 ...
Страница 86: ...DigitalSpot 7000 DT 86 Illuminance Image size chart for Long Throw Optics throw distance ratio 2 7 3 5 1 ...
Страница 87: ...DigitalSpot 7000 DT 87 Illuminance Image size chart for Short Throw Optics throw distance ratio 1 2 1 7 1 ...