Robe ColorWash 250 AT, Руководство пользователя

Страница: 23 / 32

3
Fan.S. --- Fan speed operating modes .By using this function you can choose types of the fan speed op-
erating modes.
Auto
--- The fans automatically raise their speed in order to control inside temperature
of the head, if the temperature inside increases about certain level (the low fan speed
reduces the cooling of the lighting). This cycle can repeat several times until the temperature
inside is on a suitable level.
HIGH
--- The cooling fans work on max. speed (max. cooling).This mode we recommend for
high ambient temperature (30 °C and more).
P.t.Mo. --- Pan/tilt movement mode .Use this menu to set the character of the pan/tilt movement.
ti.Mo. --- Time mode .Pan and tilt will move with different speeds and they will come at the
same time to end point (pan and tilt sets its optimal speed).
SP.Mo. --- Speed mode .Pan and tilt will move with the same speed as adjusted by the
channel 5 (Pan/Tilt speed).E.g. pan will come to the end point and wait for tilt,which has longer
track.
A.blc. --- Automatic blackout .Use this function if you wish to close the light output during effect changes.
P.t.M. ---
This function closes the light output during pan/tilt changes.
Col.M. ---
This function closes the light output during colour wheel changes.
In.Po.
---
Init effect positions
.Select this function to adjust all effects to the desired initial positions.After switch-
ing the fixture on (if DMX is not connected),all effects will move to initial positions. Use the [UP] and [DOWN]
buttons to select desired channel and press [ENTER].Set the effect to the desired position using [UP] and
[DOWN] buttons and confirm by pressing [ENTER].After having adjusted required effects,select "Stor." to save
all initial values to the memory.
dF.SE. --- Default Settings .Select this option to reset all fixture personalities to the default values.
9.5 Lamp On/Off
Use this option in order to switch on/off the lamp.It is also important to note, that the lamp is cold restrike type,
that means, that it has to be cold before striking.
9.6 Manual mode
Select this menu to call up presetted positions of channel effects or direct control channel effects.
PrE.C. --- Presetted effect control
.Select this menu to call up presetted positions of the channel effects.
Man.C. --- Manual effect control
.Select this menu to control effects by control buttoms on the control board.
PAn
a coarse pan movement
C.SPd.
a CMY/dimmer speed
F.PAn
a fine pan movement
Macr.
a CMY macro
tilt a coarse tilt movement EFFE. an effect wheel
F.tilt a fine tilt movement Zoom a zoom
SpEd a pan/tilt speed Stro. a strobe,shutter
P.t.SE. a pan/tilt macro selection dimr a shutter,strobe
P.t.SP. a pan/tilt speed F.dim. a fine dimmer
Func. a special function
Colo. a colour wheel
F.Col. a fine colour wheel
CYAN
cyan lamellas
MAGE.
magenta lemellas
YELL.
yellow lamellas