7
7.4 Tab "Manual Control"
Reset Functions
- The menu allows to reset the fixture either per function modules or all modules together.
Total System Reset
- The item resets all function modules.
Pan/Tilt Reset
- The item resets a pan and tilt movement (except Follow Spot Mode).
Colour System Reset
- The item resets a colour wheels and CMY/CTO flags.
Gobo System Reset
- The item resets rotating gobo wheels.
Dimmer/Strobe Res.
- The item resets strobe and shutter lamellas .
Optics/Prism/Frost Reset
- The item resets a zoom, focus, prism and a frost module.
Iris/Dual G. Wheel Res.
- The item resets an iris and dual graphic wheel module.
Manual Effect control
-
Use the menu to control all fixture channels by means of the control panel.
7.5 Tab "Stand-alone"
Test Sequences
-
Use the menu to run a test/demo sequences without an external controller, which will show
you some possibilities of using Robin BMFL Spot.
Dynamic Mode
- This mode uses all Robin BMFL Spot functions including pan/tilt movement and therefore
is good for a complete introduction of the fixture.
Static Mode
- This mode is suitable for projections on the wall, ceiling or ground without any pan/tilt move-
ment. Adjust the pan, tilt, zoom, focus and hot-spot to desired positions an start test sequences by touching
the green icon.
Music Trigger
- Use the item to activate the sound control of the running program via the built-in micro-
phone.
Preset Playback
- This menu allows you to select the program which will be played in a loop after switching
the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None
- The option disables “Presetting playback” function.
Test
- The option starts the test sequences.
Prog. 1
- The option starts user program No. .
Prog. 2
- The option starts user program No. .
Prog. 3
- The option starts user program No. 3.
Play program
- Use the menu to run desired program in a loop.
Play Program 1
- The option starts user program No..
Play Program 2
- The option starts user program No. .
Play Program 3
- The option starts user program No. 3.
Edit Program
- Use the menu to create or to edit desired program. The Robin BMFL Spot offers 3 free pro-
grams, each up to 00 steps.
Edit Program 1
- The option allows to edit user program No..
Edit Program 2
- The option allows to edit user program No..
Edit Program 3
- The option allows to edit user program No.3
To edit program:
1. Touch the item which you want to edit (“Edit Program 1” - “Edit Program 3”).
. Touch the item "Edit Program Steps".
3. Touch the item "Step ".
4 From the list of effects touch desired effect and set its value. Browse throw the list by touching the [up arrow]
and [down arrow] and set all desired effects.
An item "Step Time" (value of 0-25.5 sec.) is the time during which effects last in the current step
5. Save adjusted effects to the current step by touching the [confirm] or save and copy them to the following
step by touching the [copy]. By touching the text box "Preview" next to the current program step you
can view created scene.
Содержание BMFL Robin Spot Woreless DMX CRMX
