ENGLISH
7
Instructions and User Manual
15
ARF
Pay attention to a proper cable guide. Stash the excessive
length of the leads away in the wing.
14
ARF
The linkage of the flaps is realized by a crossover connec-
tion of M2,5 parts through the surface of the wing. The-
refore the rod must initially be connected to the bottom
side of the flap servo and routed through the upper side
of the wing in order to be connected with the flap`s rud-
der horn. If the servo horn is positioned in a right-angle
(neutral position), the deflection of the flap should read
approximately 15mm downwards.
17
ARF
PNP
We recommend to glue inner and outer wing part toge-
ther by using epoxy. Pay attention to the correct orientati-
on during curing process.
19
ARF
PNP
Attach the winglets or tiplets (the longer ones) to the
outer wing now. Here a fuse with transparent adhesive
tape is sufficient to switch between both versions of the
winglets. However, we recommend to glue the longer
Tiplets to the wing so that the plug does not break out in
the wing when the landing is rough or the like.
18
ARF
Optional ARF: Because of the plywood-reinforced root
ribs, the installation of a multilock system and the firm
gluing of the electrical wing connection is possible (see
PNP version).
16
ARF
Glue the servo and rod covers only after all electronic
adjustments with UHU-Por or clear tape. So the linkage
can still be fine-tuned.
PNP
