ROBBE C8 EQ-BID 180W Power Peak, Руководство по эксплуатации

Страница: 34 / 144

Operating Instructions
Power Peak® C8 EQ-BID 180W
No.
8124
10
7. PARAMETERS IN THE MAIN MENU WITHOUT BID
Select the menu by pressing the “VIEW” button, then use the “+” or “-” buttons or the Select
Wheel to display the following parameters.
INPUT VOLTAGE
Display of input voltage.
DISPLAY OF THE LAST BATTERY CHARGE PROCESSES (M1 ... M5)
This function enables you to reconstruct the last five
battery charge processes; only the charged-in capa-
city is displayed. Press the “ENTER” button to select
the parameter, then use the “+” or “-” buttons or the
Select Wheel to view the desired memory. Pressing the “ENTER” button again cancels the
selection.
DISPLAY OF THE LAST BATTERY DISCHARGE PROCESSES (M1 ... M5)
This function enables you to reconstruct the last five
battery discharge processes; only the discharged
capacity is displayed. Press the “ENTER” button to
select the parameter, then use the “+” or “-” buttons or
the Select Wheel to view the desired memory. Pressing the “ENTER” button again cancels
the selection.
DISPLAY OF MAXIMUM BATTERY VOLTAGE
Maximum battery voltage during a charge or discharge
process.
DISPLAY OF AVERAGE BATTERY VOLTAGE
Display of average battery voltage during a charge or
discharge process.
DISPLAY OF CHARGED-IN OR DISCHARGED ENERGY
Display of the charged-in or discharged energy; the
value is shown in Wh (Watt/hour).
EQUALIZER DATA
If more than six Lithium cells are connected to the charger, the screen shows two alterna-
ting displays.
Note: the individual cell voltages are only displayed if a voltage sensor lead is connected.