Contents
Page
Explanation of specialist terms / Contents
3
Safety Notes
4, 5
Set contents / Specification
6
Transmitter settings
7
Reduced and expanded control functions
8
Converting the transmitter from Mode 1 to Mode 2
8
Charging the flight battery / Installing the flight battery
9
Safety Notes regarding LiPo batteries
10
Re-binding the transmitter
11
Trim settings in Mode 1 or Mode 2
12
Controlling the model in Mode 1 or Mode 2
13
Preparations for the first flight / Important notes
14
Essential pre-flight checks / Initial flights
15
Replacement Parts list
16, 17
Conformity Declaration
18
Explanation of specialist terms
Motor speed ("Throttle"):
This controls the model's
climb and descent.
Yaw:
The model's movement around the vertical
axis; the helicopter rotates to right or left.
Elevator:
The model's movement around the lateral
axis, forward or reverse flight
Roll:
The model's movement around the longitudinal
axis, sideways movement to right or left
Mode 1:
Function assignment of the control move-
ments relative to the stick movements.
In this case motor speed (throttle) and roll are cont-
rolled by the right-hand stick; pitch-axis and tail rotor
by the left-hand stick.
Mode 2:
Function assignment of the control move-
ments relative to the stick movements.
In this case motor speed (throttle) and tail rotor are
controlled by the left-hand stick; pitch-axis and roll by
the right-hand stick.
Dual Rate:
Switchable travel reduction for control
movements.
Binding:
Creating the radio link between transmitter
and receiver.
3
Operating Instructions - BO 105 SR FTR RTF 2.4 GHz
These instructions describe the BO 105 models in the Red Bull and Military co-
lour schemes. In technical terms the two models are absolutely identical.
When ordering replacement parts please note the different colour schemes of
the two models.
