ROBBE BLUE ARROW NANO LOOP 2.4 GHz Скачать руководство пользователя страница 20

robbe Modellsport GmbH & Co.KG

Metzloserstraße 38 · D-36355 Grebenhain

Technical hotline: +49 (0)66 44 / 87-777 · hotline@robbe.com

Commercial register: Gießen Regional Court HRA 2722

Partner with personal liability:

robbe Modellsport Beteiligungs GmbH Gießen / HRB 5793   Managing Directors: E. Dörr

Errors and technical modifications reserved  Copyright robbe-Modellsport 2012

Duplication and copying of the text, in whole or in part, is only permitted with the prior written approval of robbe-Modellsport GmbH & Co. KG 

This symbol means that you should dispose of electrical 

and electronic equipment separately from the household 

waste when it reaches the end of its useful life. Take your 

unwanted equipment to your local council collection point or 

recycling centre. This requirement applies to member coun-

tries of the European Union as well as other non-European 

countries with a separate waste collection system.

Disposal of batteries

Batteries must not be discarded as domestic refuse. To 

protect the environment, always return exhausted or de-

fective cells to your local recycling centre. These include 

retail sales outlets for batteries, and communal toxic waste 

disposal centres. Cover any bare wires with insulating tape 

in order to avoid short-circuits.

robbe Modellsport GmbH & Co. KG hereby declares 

that this device conforms to the fundamental requirements 

and other relevant regulations of the appropriate CE Direc-

tive. Under www.robbe.com, you will find the original Con-

formity Declaration by clicking on the Logo button "Conform" 

shown together with the appropriate device description.

20

Operating Instructions,BLUE ARROW NANO LOOP 2.4 GHz No. S2531

Содержание BLUE ARROW NANO LOOP 2.4 GHz





















Отзывы: