Contents
Page
Explanation of specialist terms / Contents
2
Safety Notes
3, 4
Set contents / Specification / Recommended accessories
5
Transmitter description Mode 1 + 3
6
Transmitter description Mode 2 +4
7
Changing the transmitter throttle stick
8
Important assembly steps before the first flight
9
Receiver outputs
9
Transmitter LCD display
10
Transmitter settings
10, 11
Charging the battery / LiPo battery safety notes
12
Flight preparation normal and stunt modes
13
Trim adjustments in Mode 1 / Mode 2
14
Trim adjustments in Mode 3 / Mode 4
15
Controlling the model in Mode 1 / Mode 2
16
Controlling the model in Mode 3 / Mode 4
17
Important advice / The first few flights
18
Spare parts
19
Explanation of specialist terms:
Climb and descent ("Throttle/pitch"): This controls the
model's climb and descent.
Yaw:
The model's movement around the vertical axis;
the helicopter rotates to right or left.
Elevator:
The model's movement around the lateral
axis,
forward or reverse flight
Roll:
The model's movement around the longitudinal
axis,
sideways movement to right or left
Mode 1:
Function assignment of the control move-
ments relative to the stick movements.
In this case collective pitch / motor speed (throttle) and
roll are controlled by the right-hand stick; pitch-axis
and tail rotor by the left-hand stick.
Mode 2:
Function assignment of the control move-
ments relative to the stick movements.
In this case collective pitch / motor speed (throttle) and
tail rotor are controlled by the left-hand stick; pitch-axis
and roll by the right-hand stick.
Dual Rate:
Switchable travel reduction for control mo-
vements.
Binding
: Creating the radio link between transmitter
and receiver.
2
Operating Instructions,BLUE ARROW NANO LOOP 2.4 GHz No. S2531
