Robaux SWT16+, Руководство пользователя

Страница: 14 / 16

Low Latency Mode
Press the third button to set the latency of the sequencer. The sequencer
needs about two milliseconds to calculate and output all steps. You can
decrease this time to 0.45ms and enable a lookahead calculation.
AutoRun
With the fourth button you determine whether the sequencer should start
when an external clock signal arrives, or whether you want to start the
sequencer manually via the play button.
Confirm Delete
Press the fifth button to specify if you want a confirmation prompt before
deleting something. This prevents a track, a pattern or a preset from acci-
dentally being deleted.
Instant Pattern
Use Knob 6 to toggle whether a pattern change should be made directly or
only after the current bar has passed.
Debug Mode
With debug mode, you can check if all triggers, buttons, and LEDs work.
Press Button 13 and the sequencer stops. If you then press the buttons
1-16, the respective lamp lights up, and the corresponding trigger is
triggered.
To exit this mode, hold down shift + button 13.
You can also use this to turn the sequencer into a 16-trigger pad.
Factory Reset
Press and hold the
s
presets button in the Util Mode to execute a factory
reset. A flashing F appears. Press the F to perform the reset. Please note
that all data will be irrevocably deleted!