background image

 Page 

4

INTRODUCTION 

 
Congratulations on your purchase of this quality ROBAND

®

 

product.  With 

proper care and management your new purchase will give you years of 
trouble free service. 
 
By reading these instructions carefully you can ensure that this machine is 
used and maintained properly, helping your new investment to perform well 
for you now, and to continue performing in the many years to come. 

 

 

 

GENERAL PRECAUTIONS 

 

This machine must only be operated by qualified person(s) who are fully 
versed in the operating and safety instructions described in this manual. 
Servicepersons should be instructed to familiarise themselves with any and 
all safety instructions described in this manual prior to commencement of any 
maintenance or service.  
In the case of new personnel, training is to be provided in advance.  These 
machines should not be operated by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience or 
knowledge, unless they have been given supervision or instruction 
concerning the safe use of the appliance by a person responsible for their 
safety. 

 

These machines are heating units, and as with any commercial heating unit 
the surfaces on these heat lamp assemblies will get 

very hot

. Always be 

careful when near an operating heat lamp, and ensure that any risk to 
unwary customers or staff is minimised with additional signage if necessary.  
Due to the obvious heat hazard Roband recommends that these units be 
kept out of reach of children. 

 

The performance of this unit cannot be guaranteed for operational use 
outside its design parameters.  These heat lamp assemblies are designed 
mainly for the heating and warming of food. They are 

not

 designed for the 

cooking of food. 

 

The machine should be disconnected from all power and allowed to cool 
before cleaning. 

 

Roband will accept no liability if; 

♦ 

Non-authorised personnel have tampered with the machine. 

♦ 

The instructions in this manual have not been followed correctly. 

♦ 

Non-original spare parts are used. 

♦ 

The machine is not cleaned correctly, with the right product. 

♦ 

There is any damage to the unit. 

Содержание HL120

















Отзывы: