Robam ZQB400-S106, Руководство пользователя, Страница: 9 / 16

Using Methods
1. Power on
When plug in, there will be a sound and the indicator lights up.A few seconds later, the display shows ,
“ ” button flashes, and all other indicators light out. The unit enters into the standby mode (as shown in the
figure below).
Note: If no operation after a few minutes, it switches to the off state. All indicators light out (except the
buttons, press any other button, “ ” button flashes).
“ ”
、
2. Time Adjustment
In standby code, press and hold the “ ” button, and the hour indicator flashes. Rotate the right knob to set the
hour. Then press the “ ” button and the minute flashes. Rotate the right knob to set the minute. It automatically
enters after a few seconds. Or press “ ” button to enter the setting.
Note: The default time is 12. If the power is disconnected for a few seconds, the time will return back
automatically to the default time again. Time needs to be reset after the appliance is plugged in.
3. Starting up
Press and hold the “ ” button to power on the unit(see below figure).
4. Select the Cooking Mode
Rotate the left knob and select the cooking mode as needed (e.g. selected the “tendon”). The default temperature
and time is shown on the display (see below figure).
Set the cooking temperature. Press “ ” button and the temperature display section flashes, Then rotate the
“right knob” to set the temperature needed (see below figure).
7
Steam Oven