Robam ZQB400-S106, Руководство пользователя, Страница: 13 / 16

11
The problems listed in below table are the common malfunctions. Follow the instructions to confirm and deal
with the problem. If the problem still occurs or the cause could not be determined, contact the local after-sales
service department.For your personal safe, hereby reminds you: do not disassemble the unit for repair on your
own.
Problem Possible Causes What to do
Steam oven will not
start to work
Check if power is cut or the unit is
correctly plugged in
Use after the power is connected
Display panel will not
come up
Power is not connected or the PCB
malfunctions
Check the power connection or contact
the qualified personnel for repair
Light will not come on
Power is not connected or bulb failure
Check the power connection or replace
the bulb
Leak gas or water
during working
Door is not closed. Door seal is not
installed in place or damaged
Check if the door is closed. Reinstall
door seal or contact the qualified
personnel for repair
Screen becomes black
suddenly during working
Upper fan malfunctions Contact the qualified personnel for repair
Water tank is unable to
pop out
Push rod motor failure
Contact the qualified personnel for repair
Temperature sensor inside the oven
malfunction
Contact the qualified personnel for repair
Display problem
Water tank needs more water. Tank
was not pushed in place or the water
level check switch fails
Add more water or contact the qualified
personnel for repair
Display problem
Communication failure (Connection
wire of the display panel fails)
Contact the qualified personnel for repair Display problem
Warning:
Before use, push the water tank in place. During cleaning process, do not block the inlet with foreign material. If
the above problems could not be solved, contact ROBAM service center or the distributor. Disassembly by
unqualified personnel is not allowed.
Common Faults and Fault Dropping
Steam Oven