Robam ZQB400-S106, Руководство пользователя, Страница: 7 / 16

5
A
B
C
B
A
C
2-20
20
4
5
5
20
595 50
0
4
4
5
552
Air vent(200
×
) 200
Air vent(200
×
) 200
Installation Instructions
(
The pictures are for reference only and the specifications are subject to the physical product
)
Complete dimensions diagram
Semi-insertion hole diagram
Full insertion hole diagram
Mounting screw fixed plate
Follow below illustration to set the square hole at the setting position of the cabinet. Insert the steam oven steadily
into the square hole in place. Do not place the oven inclined. Detailed hole size
（
mm). refer to the below table:
A
600
560
B
460
450
C
565
550
1
2
S/N Name
Dimensions of the hole for full insertion
Dimensions of the hole for semi-insertion
(
× ×
W H D)
(
× ×
W H D)
Installation Requirements:
Power Supply Requirements:
The cabinet surface or table top to place the steam oven must be flat. The horizontal height difference between the
front & back as well as the left & right must less than 8mm (approximately 1 degree).
Use the two mounting screws provided to fix the unit onto the cabinet through the mounting holes on the left & right
door frames.
Make sure the air circulation as much as possible around the steam oven inside the cabinet. Recommend the clamp
plate and fixing plate to adopt the moisture proof, water proof, anti-corrosion and high temperature resistant material.
For permanent installation, the electrical circuit must have the disconnecting and protecting device. The power
connection plug and outlet should be of the same model and compliant with the local regulations.
If any other electric appliance nearby, make sure the installation distance is more than 100mm.
The power plug connection must be convenient. Make sure the steam oven can be disconnected as necessary from
time to time after installation.Separately use the socket of 10A or above. Do not use the same socket together with
other electric appliance. Make sure the socket is securely and effectively grounded.
Steam Oven