Robam CXW-200-A808, Руководство по эксплуатации

Страница: 11 / 12

9
LED:
M:
C:
XP:
E:
5
Circuit Diagram
Lamp
Motor
Capacitor 500VAC
Earthing Terminal
Power Plug
吸油烟机
Range Hood
General Troubleshooting
1
.
When connecting
accessory or replacing
bulb
,
please pull out
power plug
;
2
.
If power wires of range
hood damaged
,
replace
them by professionals
;
3
.
Don
'
t allow to exhaust
flame through range hood
.
Warning
Lamp damaged or improperly
contacted
Loose impeller
,
cap not properly
fastened
Plugs improperly plugged or
power off
Plug improperly earthed
Reason
No reaction in pressing any switch
(
such as
impeller does not run and lamp does not light
)
Lamp fails in pressing lighting switch
Induction current on hood surface
Abnormal impeller sound
Phenomenon
No
.
1
2
3
4
No oil in oil cup after some time
Inclined installation of hood
body
5
Warning
There shall be adequate ventilation of the room when the range hood is used at the same time as appliances
burning gas or other fuels
。
- Do not flambé under the range hood.
- Regulations concerning the discharge of air have to be fulfilled.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or
mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Accessible parts may become hot when used with cooking appliances
The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part
of the range hood. When the range hood is located above a gas appliance, this distance shall be at least 65 cm.
If the instructions for installation for the gas hob specify a greater distance, this has to be taken into account.
-
-