15
© Erwin Hymer Group North America, Inc., R00
Lights
Your Roadtrek is equipped with interior LED lighting designed to give you control based on your
requirements. There are three lights down the length of the aisle, and one more over the galley. Before
attempting to turn on any interior lights, you MUST ensure the battery disconnect switch is turned on. The
battery disconnect switch can be located on the bottom left corner of the control panel, which is above the
vehicle's sliding door.
To use the tap lights, press the fixture lens.
Tables
Your Roadtrek is equipped with two tables for your use, one for the front and one for the rear of the vehicle
Rear Table
The rear table is stored under the bench seat on the driver’s side. The table leg is stored behind the driver's seat.
To install the table, place the leg into the existing floor socket. Rotate the leg to ensure it is securely in place and then place the table top on top of the table leg.
Make sure the table leg is seated firmly in the table top socket.
Front table in position
Rear table leg storage
Rear table in position
Table leg floor socket