- 7 -
OPERATING THE TV
Using the remote control
l
Any object between the remote control and the main unit will block the path of the beam when it is
being used.
l
Dark walls,direct sunshine or very bright light will reduce the remote control sensitivety.
l
Hold the remote control within an angle of about 30
°
from either side of the remote sensor.
l
When the remote control is in front of the remote sensor,it will work within about 7 meters (23 feet) from
the unit.
l
Point the front of the remote control directly at front of the unit.
l
Function keys do not work when pressing several keys at the same time.
SPECIFICATION
l
Colour System PAL
l
Power Requirement AC 220V 50Hz
l
Power consumpion. 90W
l
Stand-by consumpion 10 W
l
Tuning system:
VST System
255 Programme memory
l
Antemma input impedance:
VHF/UHF 75 ohm,unbalanced
l
OSD(On Screen Display):
MENU Type
l
Voice coil impedance:
8 ohm
l
Sound output:
mono 1.5 W FROM 14’’; 2W FROM 21’’
l
External In/Output
A udio-In:0.5 Vrms + 3 db, over 10k ohm
Audio-Out: 0.5Vrms + 3 db,below 1k ohm
Video-In/Out: 1Vp-p+3db,75 ohm
R,G,B IN: 0.7 VP-P + 3 db
l
Feature:
Auto programme
PSM (Picture Status Memory)
8 LANGUAGE: ENGLISH.SPANISH.FRENCH.GERMAN.ITALIAN.DUTCH.RUSSIAN.
PORTUGUESE.
ALIGNMENT INSTRUCTION
1.PLEASE READ BEFORE ATTEMPTING SERVICE
1. Do not connect any antenna plug directly to the tuner socket and do not connect any equiprnents directly
to the TV chassis,otherwise it may be burnt out the TV or equipment,execept an isolation transformer is used
for main power source or the TV sets.
2.Never disconnect any leads while reveiver is in operation.
3.Disconnect all power before attempting any repairs.
4.Do not short any portion of the circuit while power is on.
5.For safety reasons,all parts replaced should be identical(for parts and pat numbers see parts list)
6.Before alignment the set must be pre-heated for 30 minutes or more and erase magnetism thoroughly
from CRT front chassis frame by erase coil.