background image

1

Components

part number 

description

9420

 ............................................. ICX transmitter

  450310-20 & -22 ...................... Velcro pads (2)
 350006-20 ................................ Phillips screws (4)

88410

 ........................................... Brake-Lite Relay

 450782-1 .................................. fuse tap (1)
 300140-04 ................................ zip ties (4)
 300085-00 ................................ blue butt connector (4)
 300080-02 ................................ 16 ga. red wire

650898

 ......................................... break away switch

 8602 ......................................... break away cable
 650900 ..................................... break away wiring harness
 300117-00 ................................ rubber grommet
 350400-20 ................................ 1" hex bolt
 350251-20 ................................ 1/4" nut
 450782-2 .................................. fuse tap (1)
 300036-00 ................................ ring terminal, blue
 300115-22 ................................ insulated female terminal, red

2

3a

3, 3e 

2a

2b

3g

3h

1. 

   a.

   b.

2.  

   a.

   b.

   c.

   d.

3. 

   a.

   b.

   c. 

   d.

   e.

   f.

   g.

   h. 

3b

3d

2d

2c

1, 1a & 1b

3c

All illustrations and specifications contained herein are based on the latest information available at the time of publication. ROADMASTER, Inc. 

reserves the right to make changes, at any time, without notice, in material, specifications and models, or to discontinue models.

Содержание Even Brake 98400










Отзывы: