The following instructions must be followed in the order listed to ensure a proper installation
and to preserve the ROADMASTER warranty.
INSTALLATION
Note:
when reinstalling the brake line locators, they may need to be
trimmed (Figure 4).
4. Once the bolts are started on both sides, tighten them
to the factory torque specifications. Then, tighten the
endlink bolts.
5. Test drive and re-check all the hardware.
Do not tow or hoist the vehicle using the anti-sway bar or its
mounting brackets as attachment points. The anti-sway bar is not
designed to carry the weight of the vehicle and may collapse, which
will damage the anti-sway bar components, the suspension, or other
components. The vehicle will detach or fall, which may cause severe
personal injury.
Failure to follow these instructions may result in property damage,
personal injury or even death.
The anti-sway bar is not a load-bearing component
WARNING
4 • Sprinter Van 3500 Rear Anti-Sway Bar Kit
800-669-9690
Figure 4
