11
Video play back:
The RoadHawk HD makes standard .MP4 video files that can be viewed on most modern computers
without using the supplied software. Simply insert the SD card in to your computer, locate the file
you wish to play and double click to open it.
Windows media player, VLC or Quicktime will be able to play the video and audio files for you but to
see the G-Force, Speed, GPS and mapping details then you need to install the supplied software.
The G-Force and GPS data is embedded within the .MP4 video file. To view your position on a map
and to see the speed and G-Force data you will need to install the RoadHawk HD Playing software
included on a CD-ROM in the box.
Installing the software:
Insert the CD-ROM in to your computer. Locate the install file and double click it. Once installed, the
software will ask if you would like to run it. If your computer is not equipped with a CD-ROM drive
then you can visit
www.roadhawk.co.uk
to download the software direct to your computer.
You may be required to install Adobe components for the software to operate correctly. Your
computer will need to have an active internet connection for this to happen.
Using the software:
IMPORTANT NOTE
When you run the RoadHawk software it will look for the SD card from the RoadHawk HD camera.
If the SD card is blank, the software will
NOT
see the SD Card. You
MUST
use the SD card in the
camera
BEFORE
using this software.
Once you insert the SD card from the camera in to your computer it will list all the video files on that
card on the right hand side of the screen. A USB card reader is supplied with the RoadHawk HD
camera.
