LEG ABDUCTOR (Pommel) (Optional) INSTALLATION
Tools Required:
4mm Hexagon Key
The Gill 4 Pommel Fig.23, is intended
to assist with user positioning, by
offering adjustable, multi-directional
Pads, mounted on a height adjustable
vertical Stem and depth adjustable
horizontal Stem. The Pommel
assembly can be easily inserted into
it’s Pop
-Pin type Receiver Mount,
located under the front of the Seat
Panel.
Where a Pommel is not supplied
initially, with the Gill 4 Seat Unit, a
Receiver Mount (Supplied with the
Pommel), must be fitted under the
Seat Panel. Lift the front of the Seat
Cushion to locate the two pre-drilled
holes at the front of Seat Panel
intended for this purpose, Fig.24.
Using the screws and threaded key
washers supplied, attach the Receiver
Mount centrally to the underside of the
Seat Panel, with the black Thumb Screw
towards the left-side of the Seat Unit.
Tighten both screws sufficient to prevent
any
movement, ensuring that the
threaded key washers are correctly
located in their slots Fig.24.
The horizontal Stem is fitted with a spring
“Pop
-
Pin” that can be inserted into one of
four holes Fig.25. This combination
enables depth adjustment in 25mm
increments.
14
Fig. 24
Receiver
Mount
Vertical
Adjustment
Lock Nut
Black Locking
Thumb Screw
Pop-Pin
Release
Key
Washers
Fig. 23
Fig. 25
“Pop
-
Pin” with
Adjustment Holes
Cover for Pad
Adjustment
Mechanism
