ADJUSTING the Gill 4 SEATING SYSTEM
All Gill 4 Seating Systems, will be supplied by RMS Ltd, to the specifications
detailed on the initial prescription. However, further initial adjustments may be
necessary at the time of delivery, to suit individual requirements.
Periodic adjustments may also be necessary to allow for changes in the user’s
disability, user growth and the user’s need for changes in seasonal clothing.
Seat Depth adjustment
Tool Required: 4mm Hexagon Key.
The Seat Depth is adjusted
by
slackening
three screws
on each side of the lower
Backrest Mountings Fig.9
and moving the Backrest
forwards
or
rearwards
equally, within the seat rail
tracks.
After achieving the required
seat depth, retighten all
screws
on
both
sides
sufficient to prevent any
movement.
NOTE:
Following
the
Backrest adjustment, it may
be necessary to move the Pelvic Belt Mountings and / or Sidearm Frame
Mounting positions.
A 4mm Hexagon Key is required to adjust the Pelvic Belt position, Fig.10. Flip-
up the Belt Mounting cover, to expose the mounting screw.
Slacken only
, adjust
Belt Mounting position and retighten screw, sufficient to prevent any movement.
The initial Pelvic Belt length should also be adjusted at the Mountings before re-
securing the Mounting cover.
The standard Pelvic Belt is of the “single
-
pull” type which is finally adjusted after
connecting the Main Buckle, by simply pulling the D-ring belt.
A 5mm Hexagon Key is required to
adjust the Sidearm Frame Mounts.
Remove the black Height Locking
Screws to access the front Sidearm
Mounting screw.
Slacken
both screws, move Frame
to required position and retighten
both screws, sufficient to prevent any
movement.
Secure Sidearm at required height,
by refitting and tightening the black
Height Locking Screw Fig.10.
7
Fig. 9
Fig. 10
Pelvic Belt Mount
lift flap to gain
access to screw
Sidearm
Mounting Screws
Height Locking
Screw
Backrest Mounting
Screws
