Street Light Timer
3
V
er
si
on
1
.0
–
07
/1
9
Web: www.rmgautomation.com eMail: [email protected] Contact: 044 - 43180017
Step 4:
Press SET Key. It displays as
asking for the password. But by default the
password set would be 0000. Hence you can press the SET key once again to enter into the settings.
There are totally four settings.
Use NEXT key to select the preferred settings.
Setting 1. Date and Time.
Step 1: Press SET key. It enters into the below screen.
Step 2: Use NEXT key to move from D (Date Location), M (Month Location), Y (Year Location), H (Hour Location),
M (Minute Location) and W (Week day Location). By using the UP key, you can select the values.
Step 3: Press SET key to save the set date and time.
Step 4: Home screen displays the set date and time.
Setting 2. ON and OFF.
Step 1: Press SET key. It asks for password. As said earlier, the password is default 0000. Press SET key once
again. Setting 1 appears. Then Press NEXT key. It enters into the below screen.
Step 2: Press SET key to enter into the setting 2. It appears as below.
Use NEXT key to select the programmable time slot. There are 25 ON/OFF programs for you to set the motor ON
and motor OFF time.
Step 3: Select 1
st
Programmable time slot. Press SET key. It moves to the motor ON time. Using NEXT and UP key,
set the motor ON time. Press NEXT and UP key again to set the motor OFF time.
Step 4: Press SET key to save the set date and time.
Setting 3. MODE.
Step 1: Press SET key. It asks for password. As said earlier, the password is default 0000. Press SET key once
again. Press NEXT key twice. It enters into the below screen.
Step 2: Press SET key to enter into the setting 3. Use NEXT key to select the mode. Press SET key again once the
mode is selected.
