The remote shows an over notification above the level meter, both in miniature port level meters and the
larger level meters when a port is open.
To switch persistant over notifications on or off:
1. Locate the Visual Settings Tab.
2. Change
Peak + OVR Hold
to either
◦
5s
to notify for five seconds
◦
On
to notify until manually reset
◦
Off
to deactivate over notifications
To reset over notifications:
1. Within the Visual Settings Tab, use the
⟲
reset
button.
8.4.4. Metering of Digital Input Signals
The digital input signals can be visually inspected to ensure that audio signals are reaching the device.
To temporarily assign the 32 front panel level meters to a digital input, open the
INPUT
section and
choose the relevant digital
input
tab.
In the MADI optical and MADI coaxial tabs, two toggle switches can be pushed and held to inspect either
channels 1-32
or
channels 33-64
.
In the AVB input tab, one toggle switch per stream can be pushed and held to inspect the relevant
stream.
This feature is temporary and lasts only while the encoder is pushed. Afterwards, the front
panel level meters will show the level of the analog outputs.
On the web remote, each input port can be opened and level meter indicators will appear above the
channel number.
8.5. Remote Control Overview
The M-32 DA Pro can be remote controlled. Remote control is activated by default and is not affected by
preset changes or device lock.
The network controls over HTTP and AVDECC operate simultaneously. Two or more controller instances
are synchronized. The MIDI control communicates either via DIN or embedded into either one of the
MADI signals. Both network and MIDI control can be used at the same time.
The remote control protocols are not protected against malicious use. When activated, the
remote control server allows anyone on the network to make changes to the configuration
of the device. To limit access, secure the network that the device is connected to.
8.5.1. Finding the Device on a Network
The M-32 DA Pro has two integrated network adapters (USB 2.0 and ethernet).
RME M-32 DA Pro User’s Guide
33
| 8.5. Remote Control Overview
