RME Audio HDSPe MAD, Руководство пользователя

Страница: 32 / 80

32
User's Guide HDSPe MADI
© RME
Safe Mode
Input
activates redundancy operation. If the current input signal fails, the other input will be used
immediately, provided a valid signal is found there. Input also works as automatic input selec-
tion, in case only optical or coaxial is present as input signal.
Clock Mode
The unit can be configured to use
its internal clock source (Master),
or the clock source pre-defined via
Pref. Sync Ref (AutoSync).
Pref. Sync Ref.
Used to pre-select the desired
clock source. If the selected
source isn't available, the unit will
change to the next available one.
The current clock source and
sample rate is displayed in the
AutoSync Ref display.
The automatic clock selection
checks and changes between the
clock sources Word Clock, TCO
and MADI.
Input Status
Displays the state of the current
input signal:
•
Channel format (64 or 56 channels)
•
Frame format (48K or 96K)
•
Sample rate (measured)
•
Active input (optical or coaxial)
System Clock
Shows the current clock state of the HDSP system. The system is either Master (using its own
clock) or Slave (see AutoSync Ref).
SyncCheck
SyncCheck
indicates whether there is a valid signal (Lock) for the inputs Word Clock, TCO and
MADI, or if there is a valid and synchronous signal (Sync). The AutoSync Reference display
shows the input and frequency of the current sync source.