RME Audio Fireface 802, Руководство пользователя

Страница: 61 / 112

User's Guide Fireface 802 © RME 61
25.4 Section Control Room
In the section Control Room the menu
Assign
defines the
Main Out
which is used for listening
in the studio. For this output the functions Dim, Recall, Mono, Talkback, External In and Mute
FX are automatically applied. At the unit the VOLUME knob follows this assignment.
Additionally the channel will be shifted from the Hardware
Outputs into the Control Room section, and renamed
Main
.
The same happens when assigning Main Out B or the
Phones. The original name can be displayed by the function
Names
in the View Options at any time.
Phones 1 to 4 will have Dim (set in Settings) and a special
routing applied when Talkback is activated. Also putting them
beside the Main Out increases the overview within the output
section greatly.
Dim.
The volume will be reduced by the amount set in the
Settings dialog (F3).
Recall.
Sets the gain value defined in the Settings dialog.
Speaker B.
Switches playback from Main Out to Main Out B.
The faders of the channels Main and Speaker B can be
ganged via Link.
Mono.
Mixes left and right channel. Useful to check for mono compatibility and phase problems.
Talkback.
A click on this button will dim all signals on the
Phones
outputs by an amount set up
in the Preferences dialog. At the same time the control room's microphone signal (source de-
fined in Preferences) is sent to the
Phones
. The microphone level is adjusted with the channel's
input fader.
External Input.
Switches Main monitoring
from the mix bus to the stereo input
defined in the Settings dialog (F3). The
relative volume of the stereo signal is ad-
justed there as well.
Mute FX.
Mutes Reverb and Echo on the
Main Out, to hear the mix without those
effects.
Assign.
Allows to define the Main Out,
Main Out B (Speaker B), and up to four
Phones outs. The choice is limited to
ADAT 3/4, as at 192 kHz the other ADAT
channels are not available anymore.
The output for the Cue signal, which is
usually Main, can also be set to one of the
Phones outputs. This setting also controls
the PFL monitoring.