RME Audio Fireface 802 Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 112

background image

112

User's Guide Fireface 802

© RME

40. CE / FCC Compliance

CE

This device has been tested and found to comply with the limits of the European Council Direc-
tive on the approximation of the laws of the member states relating to electromagnetic compati-
bility according to RL2004/108/EG, and European Low Voltage Directive RL2006/95/EG.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

Note

: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.

RoHS

This product has been soldered lead-free and fulfils the requirements of the RoHS directive.

ISO 9001

This product has been manufactured under ISO 9001 quality management. The manufacturer,
IMM Elektronik GmbH, is also certified for ISO 14001 (Environment) and ISO 13485 (medical
devices).

Note on Disposal

According to the guide line RL2002/96/EG (WEEE – Directive on Waste
Electrical and Electronic Equipment), valid for all european countries, this
product has to be recycled at the end of its lifetime.

In case a disposal of electronic waste is not possible, the recycling can also
be done by IMM Elektronik GmbH, the manufacturer of the Fireface 802.

For this the device has to be sent

free to the door

to:

IMM Elektronik GmbH

Leipziger Straße 32

D-09648

Mittweida

Germany

Shipments not prepaid will be rejected and returned on the original sender's costs.

«
...
110
111
112

Содержание Fireface 802

















































































































Отзывы:

Нет отзывов

Похожие инструкции для Fireface 802

Бренд: Vector Welding Страницы: 81

Бренд: NAD Страницы: 2

Бренд: NEC Страницы: 10

Бренд: EAW Страницы: 2

Бренд: EAW Страницы: 2

Бренд: EAW Страницы: 2

Бренд: Eaton Страницы: 68

Бренд: Eastwood Страницы: 16

Бренд: Eastwood Страницы: 16

Бренд: Harman Kardon Страницы: 32

Бренд: Harman Kardon Страницы: 73

Бренд: Harman Kardon Страницы: 30

Бренд: Harman Kardon Страницы: 115

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 10

Бренд: Harman Kardon Страницы: 3

Бренд: Harman Kardon Страницы: 19

Бренд: Nakamichi Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды