- 7 -
3.2.7. Setup of the display brightness
The display brightness can be adjusted in 8 steps. An abbreviation
br
and the
brightness step 1 to 8 is displayed. If you choose
0
, an abbreviation
AU
is displayed
and the brightness is changed automatically depending on the solar radiation.
After this setup, everything is adjusted. After adjusting the brightness, you return to
the time setup. The setup mode can be ended by the same way as started.
In case of need, by pressing the
I-II
button, menu can be expanded to a special
menu for data correction. Moving through digits is done by this button or by
P<P
button.
3.2.8. Time correction setup
Is used for time measure correction. For proper setup, you have to know, how the
time changes in seconds in a week. A letter
H
is displayed and the number after
shows the value in seconds that must be added or subtracted. The – symbol means
subtracting and can be entered by pressing the button
-/- -
. The time correction is
distributed equally and is set every day at 00:00:30.
3.2.9. Temperature correction setup
Measured temperature can be also corrected. An abbreviation
Ct
is displayed and
the value of degrees can be changed in the range -9 to 9. Degrees will be added or
subtracted from the temperature.
3.2.10. Time format setup
Displaying of time can be in 12 or 24 hour format. An abbreviation
Fo
is displayed
and by pressing the
0
button you choose 24 hour format, by pressing the
1
button
you choose the 12 hour format.
