- 6 -
3.2. Parameter setup
After switching on the power supply, time, date and temperature are showed on the
display in adjusted intervals. The clock can be adjusted by supplied infra-red
controller RC403HL. You can access the menu after pointing the controller to the
clock and pressing the
P<P
button for longer than 2 seconds. To move to another
item, press the button shortly. After moving to another item, the adjusted value is
saved immediatelly. The menu mode can be switched off in the same way as it was
switched on. After no operation within 20 seconds, the clock switches back to the
basic display mode.
!!! Warning: controlling of the double-sided clock is possible only from the front
side. If the clock is gripped at the side, you have to stay in front of the clock and
the console must be at the left side. The controller range is app. 20m. The solar
radiation reduces the operating range and you have to step closer. We
recommend to set up the clock at lower solar radiation.
3.2.1. Time setup
After entering the menu, the first digit blinks. After overwriting the value with the
0-9
button, the next digit blinks. In this way you can set up hours and minutes and
the whole cycle than repeats. Desired value can be set by pressing the
P<P
button,
which also moves the blinking digit.
3.2.2. Date setup
Date is set in the same way as before in the
DAY. MONTH
format.
3.2.3. Year setup
Can be adjusted in range of 2000-2099.
3.2.4. Setup of interval of displayed time
An abbreviation
th
and blinking digit is displayed. The display interval can be
changed from 2 to 59 seconds.
3.2.5. Setup of interval of displayed date
An abbreviation
th
and blinking digit is displayed. The display interval can be
changed from 0 to 59 seconds. After setting the
0
value, the title
OF
is displayed
and the date won’t be showed. From 1st to 7th January, after displaying the date,
the title
PF
with year will be showed for three seconds.
3.2.6. Setup of interval of displayed date
An abbreviation
tt
and blinking digit is displayed. The display interval can be
changed from 0 to 59 seconds. After setting the
0
value, the title
OF
is displayed
and the temperature won’t be showed. If there is any malfunction of the
temperature sensor, the temperature won’t be showed.
