Copyright © 2013 Ready Made RC, LLC
5
14. Attach motor mount bracket to
back of motor with the 4 Phillips
machined screws. Use blue thread
locker to secure.
-
Attach prop mount to front
of motor using 4 cap hex
screws. Tighten in an “X”
pattern. Use blue thread
locker to secure.
15. Connect motor wires to ESC
wires. Before securing the motor to
housing, check for proper motor
direction in relation to the prop. To
test, temporarily connect ESC,
Radio, battery, and apply a small
amount of throttle.
Do not attach
prop for this test.
-
If motor is rotating in the
wrong direction, simply
swap any 2 of the wires, and
direction will change.
16. Once you have checked for
proper motor direction, push excess
wire through access hole and bolt
motor to housing using the 4 Phillips
machined screws. Thread locker is
not needed due to lock nuts.
17. Align horizontal stabilizer with
bracket on fuselage and fit into
place.
