RLE Technologies WiNG-MGR v2 Скачать руководство пользователя страница 85

Страница: 85 / 94

rletech.com

WiNG-MGR v2 User Guide

Alternate Channel Pair Communications

C.3.

Add a Range Extender to A WiNG System

While WiNG systems have more than an ample transmission range for most situations,

sometimes applications require signals to be pushed through more complex physical or noisy

RF environments. The WiNG-RXT range extender can be implemented in these situations to

add up to 1,000 feet direct line of sight transmission distance per range extender to the

application.

To add a WiNG-RXT to your application, connect the antennas (magnetic base antennas into

ports A and B, and swivel antenna into port C) and apply power to the device. Ensure the most

effective antenna placement - antennas A and B can be close together, but to avoid signal

interference they need to be as far away from antenna C as your installation will allow. Extend

the leader cables on the antennas to their fullest lengths and secure the antennas as far away

from the WiNG-MGR - and has high off the ground - as possible.

Access the WiNG-MGR’s web interface and navigate to the Admin > Radio Configuration

page. Radio C needs to be on in order for the WiNG-MGR to communicate with the WiNG-

RXT.

Just like WiNG-MGRs and WiNG sensors, the WiNG-RXT can communicate on different

channel pairs. By default, it is set to communicate on channel pair 1. The System LED on the

front of the unit indicates on which channel pair it is communicating. If it blinks blue, it’s

communicating on channel pair 1. If it blinks green, it’s communicating on channel pair 2.

Most importantly, the WiNG-RXT needs to be communicating on the same channel pair as the

sensors it is trying to pick up. If the sensors are on channel pair 1, the WiNG-RXT needs to be

on channel pair 1. And likewise, if the sensors are on channel pair 2, the WiNG-RXT needs to

be on channel pair 2 as well. You may have a specialized installation that has the WiNG-MGR

on channel pair 1 picking up one set of sensors, and the associated WiNG-RXT is on channel

pair 2 picking up an entirely different set of sensors. This too is fine. Just remember the

sensors you’re trying to pick up must be on the same channel pair at the device that should be

receiving their signal.

Содержание WiNG-MGR v2































































































Результаты поиска

Содержание WiNG-MGR v2

Отзывы:

Похожие инструкции для WiNG-MGR v2

Бренды по названию

Популярные бренды

RLE Technologies WiNG-MGR v2, Руководство пользователя

Результаты поиска

Содержание WiNG-MGR v2

Отзывы:

Похожие инструкции для WiNG-MGR v2

Бренды по названию

Популярные бренды