RP-2009 Pump for the GX-2009
15
6. Install the new hydrophobic filters and/or wire mesh disk making sure
a hydrophobic filter is located on each side of the wire mesh disk.
7. Reinstall the gasket with the parts into the pump unit.
8. Reinstall the filter holder with the cotton dust filter. Align the two tabs
on the bottom of the filter holder with the two slots in the pump unit.
Push the filter holder into the pump unit and turn it 1/4 turn clockwise
until it snaps into place.
Parts List
Table 2 lists replacement parts and accessories for the RP-2009 pump.
Table 2: Parts List
Part Number
Description
07-2005RK
Gasket, filter/screen retaining
07-6027RK
O-ring, for battery compartment
17-1001RK
Tapered rubber nozzle
21-1833RK
Filter holder, clear plastic
21-1895RK
Battery cap
33-0159RK
Hydrophobic disk filter
33-1031RK
Cotton ball 25 pack, for replacement of cotton dust filter
33-1112RK
Wire mesh disk filter
49-1120RK
AA alkaline battery
80-0009RK-XX
Sample hose (optional). Replace “XX” with length in feet.
Available lengths for the RP-2009 are 10, 15, 20, 25, & 30
feet.
80-0150RK
Sample probe with dust filter (optional)
