12 • AirLink 9900
Start Up
This section describes procedures to start up the AirLink 9900 and place the AirLink 9900 into normal
operation.
1. Complete the installation procedures described earlier in this manual.
2. Verify that the power wiring is correct and secure.
3. Turn on the power source.
4. Verify that the controller is on and operating properly. Refer to the controller operator’s manual.
5. The AirLink 9900 automatically powers on and enters a 20-second startup period.
6. At the end of the startup, the AirLink 9900 is in Normal Operating Mode.
1
Network ID A (input)
5
Product serial number
2
Network ID B (output)
6
Date of manufacture
3
Product model
7
Link status indicator - able to
communicate with primary monitor
4
Firmware version
8
Link status indicator - unable to
communicate with primary monitor
