T2A Transmitter • 23
Powering On
Powering on the device begins the operation of the unit, automatically initiating the system
start-up cycle and 1-minute warmup period. The T2A will be in normal operating mode at the
completion of the system start-up.
1. Press the ADD button once to turn the unit on.
Faults
In the event of a device failure, the unit will alternate between the normal operating screen and
a fault screen on the display, in 5 second intervals, until the fault has been cleared, or is
corrected. The fault code, located in the bottom-left corner of the display, appears on both
screens. The unit continuously registers that the system is in fault. When the fault is corrected,
the unit will return to normal operating mode.
For a list of the fault codes and warning symbols of the T2A, and their associated meaning,
see page 32.
Accessing Menus
The Product Settings and Configuration menu is accessible from Normal Operating Mode. To
access the Product Settings and Configuration menu,
press and hold
the
MENU
button, for
approximately 6 seconds, until the menu is activated and open on the display screen.
NOTE:
After 5 minutes of no interaction with the device, the unit will automatically return to
normal operating mode.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
