3. SETTING FOR COMMUNICATION
IM9000F02-E2
9
3.4 Device address setting
Set the desired device address by using the corresponding numeric value from 0 to 99.
Press the UP or DOWN key to change the numeral, and also press the SHIFT key to shift the digit.
Symbol and symbol name
Setting range
Range :
0 to 99
Factory set value :
0
Setting procedure
For the 2-channel type REX-F9000, set independent device addresses to CH1 and CH2.
Example :
When setting device address to 15.
c
Change the controller to parameter group 24 (PG24), and then
display the device address (See P.8).
d
Set the devise address. Press the UP key to enter "5" in the
lowest
digit.
:
Bright lighting
: Dim lighting
SET
MODE
MONI
CH
CH
PV
SV
CAUTION
SET
MODE
MONI
CH
CH
PV
SV
(Add) : Device address
