WAC8112INS V1 05/08/16 JE LH
E&OE Copyright © 2016 RKC Holdings Pty Ltd
ELECTRICAL CONNECTIONS
GENERAL ADVICE
AIRLINE TUBING & FITTINGS - GENERAL NOTES
CUTTING
Only cut the airline tubing with a sharp blade making the cut as square as
possible.
Always trim the tubing before re-inserting into the fitting.
If you use a sharp utility knife or razor blade great care must
be taken in all cases not to cut yourself during this operation.
Contact Airbag Man for our recommended tube cutter tool.
CUT TUBING
SQUARE WITH
SHARP BLADE
OR TUBE
CUTTER
DO NOT USE
PLIERS, SIDE
CUTTERS OR
PIPE CUTTERS
PUSH TO CONNECT FITTING
CONNECTING & REMOVING
To connect
:
Push the cleanly trimmed tubing firmly into the fitting as far as possible.
To remove:
First release the air pressure from the system.
To withdraw the tubing, push and hold the collar on the fitting away from the tube and pull out the tubing.
In confined spaces an open ended spanner can be used to evenly depress the collar and remove the airline tubing.
SEE OTHER WARNINGS AND IMPORTANT INFORMATION IN THE PRODUCT MANUAL
LHS = LEFT SIDE OF THE VEHICLE WHEN FACING FORWARD
STEP 1
– PREPARE THE VEHICLE
Please note it may be necessary to remove components from the vehicle to fit this kit, ensure this is carried out according to the vehicle
manufacturer’s instructions regarding electrical connection and component positioning and mounting.
DO NOT connect any electrical components to the vehicle without preparing the electrical system as per the vehicle
manufacturer’s instructions. Connecting without preparing the vehicle could lead to component failure, vehicle damage
or fire.
