WAC8112INS V1 05/08/16 JE LH
E&OE Copyright © 2016 RKC Holdings Pty Ltd
FITTING INSTRUCTIONS
AC8112
It is recommended that only a properly qualified person installs the product and carries out maintenance. If you are not
qualified and attempt to carry out such work ensure that all safety equipment is used and safety standards are met.
Ensure that you have read the full Product Manual before attempting to fit the product.
Ensure the Product Manual is kept with the vehicle and that any vehicle owner and/or operator are fully advised on the
system and its operation before attempting to drive or operate it.
DO NOT connect any electrical components to the vehicle without preparing the electrical system as per the vehicle
manufacturer’s instructions. Connecting without preparing the vehicle could lead to component failure, vehicle damage
or fire.
If you use a sharp utility knife or razor blade great care must be taken in all cases not to cut yourself during this operation.
Air compressors get hot - avoid any flammable liquid or burn risk areas.
The air tank is rated to a maximum working pressure of 150 psi (10 bar) and this is never to be exceeded.
Incorrect
use
of
this
product
can
result
in
damage
to
the
components
associated
parts
and/or the vehicle, which is not covered under warranty.
Ensure suspension airbags are maintained at the stated ride height at all times and maintain the minimum pressure
required and never exceed the maximum, as required by the particular airbag product.
AIR CONNECTIONS
